OPERATING MANUAL
Dear Customer
Many thanks for the confidence you have shown in us with the purchase of your new JET workshop lamp. Please read
and understand the information contained in these operating instructions and the accompanying documents. To obtain
maximum life and efficiency from your product, and to use the machine safely, read this manual thoroughly and follow
instructions carefully.
TECHNICAL DATA
INCLUDED ITEMS
Workshop light
USB cable
Power supply unit
CHARGING INDICATOR
The charging indicator is on the side of the lamp and consists of five LEDs.
These show the current capacity. When the remaining capacity is low,
only one LED lights up green.
CHARGING PROCESS
The micro USB charging socket is on the side, below the rubber protective cover.
When the lamp is charging, a green blinking LED is displayed on the charging
indicator. Once it is fully charged, all five LEDs light up. The lamp must not be
switched on while charging.
OPERATION
The COB LED light bar can be turned on and off using the rotary switch.
The intensity of the light can be regulated by turning the switch clockwise.
The LED headlight can be turned on and off using the rubber switch.
Capacity:
2 – 15 hours / 10 hours operating time
Light source:
COB LED / High power LED
Light power:
0 – 560 / 120 lumens
Charging time:
4 hours
Battery:
3,7 V / 2'600 mAh, Lithium-Ion
Input voltage, Micro USB:
5 V / 1'000 mA
Spash-water protection:
IP54
Impact resistance level:
IK07
