PROGRAM SETUP INFORMATION
Step # 19
Setting mercy ticket values
Use the up or down arrow keys to change between the
different score states. Select the letter of the score state that
you would like to set. Push the
"ENTER"
button to select that
score sate.
Step # 20
Setting the score state values
Step # 21
Setting the score state values - continued
From the
"MERCY TICKETS"
page, you can select the number
of mercy tickets the game will pay out should there be a
malfunction during game play. Please note that the game will
only pay out mercy tickets should a malfunction occur.
In
many cases - due to the design of the software, should a
malfunction occur, the game will award another play
instead of paying out mercy tickets.
There are four different pre-set score state values that can be
chosen by the operator. The game software has been
designed so that it is very easy to change between these
score states should the need arise. The values displayed on
this page correspond to the nine score SEG displays along the
bottom of the playfield. The values on this screen are
displayed from left to right and the largest number will be in
the center channel. To change the score state values, push
the
"ENTER"
button and then use the arrow keys to select a
new pay table. Push the
"ENTER"
button to confirm your
selection. Note: Any value two digit value can be used for any
channel. For information on how to program a custom value,
please contact JET.
Jennison Entertainment Technologies
Space Ballz Service Manual
Page 43
