DANGER
SECTION # 4 WEIGHS APPROX. 100 POUNDS. THE
TWO PEOPLE WHO WILL INSTALL THIS SHOULD BE
ABLE TO LIFT THAT AMOUNT OF WEIGHT ABOVE
THEIR HEADS FOR AN EXTENDED PERIOD OF TIME.
For Section # 4 to fit quickly, insert the top two tabs into the
receiving holes first. This will require you to slightly angle the unit in
order to fit the tabs. Once the tabs are inserted into the receiving
holes, you can release some of the angle and allow the unit to slide
into a locking position. The bolts on Section # 3 should slide right
into the holes on Section # 4.
DANGER
SECTION # 4 WEIGHS APPROX. 100 POUNDS. THE
TWO PEOPLE WHO WILL INSTALL THIS SHOULD BE
ABLE TO LIFT THAT AMOUNT OF WEIGHT ABOVE
THEIR HEADS FOR AN EXTENDED PERIOD OF TIME.
While lifting Section # 4 up towards Section # 3, visually align the
metal tabs with the receiving holes as you climb up the step stool.
This will make placement quicker and require less effort.
Step # 6-G
Lifting Section # 4 and aligning the tabs with receiving holes
Check Box When This Step is Complete
Step # 6-H
Fitting Section # 4 to Section # 3
Check Box When This Step is Complete
Step # 6-I
Section # 4 re-positioning
INSTALLATION INSTRUCTIONS
In some cases - the tabs may go directly into the receiving holes - but
the bolts on Section # 3 are not aligned with the holes on Section # 4.
In this case, you may need to lift the entire unit up slightly and then
allow if to fall back into place which watching the location of the
bolts.
DANGER
DO NOT RLEASE YOUR GRIP UNTIL YOU ARE SURE
THAT THE TWO TABS FIT PROPERLY INTO THE
RECEIVING HOLES.
Check Box When This Step is Complete
Jennison Entertainment Technologies
Space Ballz Service Manual
Page 23
