Jet ProShop II, Operating Instructions Manual

Page: 9 / 40

9
5.0 Specifications
Table 1
Model number JPS-10TSL JPS-10TSL
Stock number 725000K-RU 725000K-3RU
Motor and Electricals
Motor type Totally enclosed, fan cooled, induction
Horsepower 1.5Kw (2HP) 1.87kW (2.5HP)
Motor phase 1 PH 3Ph
Motor voltage 230 V 400 V
Cycle 50Hz
Listed FLA (full load amps) 11 A 4 A
Motor speed 2800 RPM
Starting amps 43.6 11.8
Running amps (no load) 7.3 1.5
Start capacitor 400MFD/125VAC N/A
Run capacitor 50µF/350VAC N/A
Power transfer belt
On/off switch
Magnetic switch
KJD17B_230V (NVR type)
Magnetic switch
KJD18_400V (NVR type)
Power cord H05VV-F x 3C 1.5mm² H05VV-F x 4C 1.0mm²
Sound emission without load
2
80 dB at 30 in. (762mm) from blade
Arbor and blade
Arbor diameter 5
/8” , flange with M30mm collar
Arbor speed 4000 RPM
Arbor lock Included
Arbor wrench Included
Blade included 10 in. (254 mm), 40 tooth
Maximum depth of cut at 90 degrees 3-1/8 in. (79 mm)
Maximum depth of cut at 45 degrees 2-1/8 in. (54 mm)
Maximum rip to right of blade 30 in. or 52 in.
Maximum rip to left of blade 13.5 in. (343 mm)
Blade height per one revolution of handwheel 5/32 in. (4 mm) at 90°; 7/64 in. (2.83 mm) at 45°
Dado maximum width 13/16 in. (20.6 mm)
Dado maximum diameter 8 in.
Blade tilt 45° left tilt
Table
Main table dimensions, L x W 20 x 27 in. (508 x 686 mm)
Table dimensions with wings, L x W 44 x 27 in. (1118 x 686 mm)
Table area in front of blade at maximum height 8.81 in. (223.83 mm)
Table height from floor, approximate 34-3/4 in. (883 mm)
Miter T-slot, W x D 3/4 x 3/8 in. (19 x 10 mm)
Edge bevel Front
Main materials
Main table Cast iron
Table insert Aluminum
Extension wings Cast iron
Base and legs Steel
Center trunnion Cast iron
Pulleys Steel