Jet JTM-1050, Operating Instructions And Parts Manual

Page: 5 / 36

5
29. Never leave the machine running unattended.
Turn the power off and do not leave the
machine until it comes to a complete stop.
30. Remove loose items and unnecessary work
pieces from the area before starting the
machine.
31. Don’t use in dangerous environment. Don’t
use power tools in damp or wet location, or
expose them to rain. Keep work area well
lighted.
32. Some coolants used for machining contain
chemicals that may be hazardous to your
health if not used properly. Read and
understand all user information listed on the
coolant container and protect yourself
accordingly.
Familiarize yourself with the following safety notices used in this manual:
This means that if precautions are not heeded, it may result in minor injury and/or
possible machine damage.
This means that if precautions are not heeded, it may result in serious, or possibly
even fatal, injury.
4.0 About this manual
This manual is provided by JET covering the safe operation and maintenance procedures for a JET Model
JTM-1050 Turret Mill. This manual contains instructions on installation, safety precautions, general operating
procedures, maintenance instructions and parts breakdown. Your machine has been designed and constructed
to provide consistent, long-terms operation if used in accordance with the instructions as set forth in this
document.
This manual is intended to familiarize you with the technical aspects of this milling machine. It is not, nor was it
intended to be, a training manual. Do not operate this machine until appropriate training and knowledge have
been acquired.
If there are questions or comments, please contact your local supplier or JET. JET can also be reached at our
web site: www.jettools.com.
Retain this manual for future reference. If the machine transfers ownership, the manual should accompany it.
Read and understand the entire contents of this manual before attempting assembly
or operation! Failure to comply may cause serious injury!
WARNING: This product can expose you to
chemicals including cadmium which is known to
the State of California to cause cancer and birth
defects or other reproductive harm. For more
information go to http://www.p65warnings.ca.
gov.
WARNING: Some dust, fumes and gases
created by power sanding, sawing, grinding,
drilling, welding and other construction activities
contain chemicals known to the State of
California to cause cancer and birth defects or
other reproductive harm. Some examples of
these chemicals are:

lead from lead based paint

crystalline silica from bricks, cement and
other masonry products

arsenic and chromium from chemically
treated lumber
Your risk of exposure varies, depending on how
often you do this type of work. To reduce your
exposure to these chemicals, work in a well-
ventilated area and work with approved safety
equipment, such as dust masks that are
specifically designed to filter out microscopic
particles. For more information go to
http://www.p65warnings.ca.gov/
and http://
www. p65warnings.ca.gov/wood.