8
Fig 8
Attach the Fence to the Table (Fig 9):
Attach the fence to the table, with 2 carriage bolts, washers and
knobs.
Fig 9
Attach the Fence Boards and Dust Port (Fig 10):
Attach the fence boards to the fence, with 4 carriage bolts,
washers and knobs. Attach the dust port (D).
Fig 10
Attach the Workpiece Hold Down (Fig 11):
Attach the hold down support (N) with two screws and nuts (P).
Attach the workpiece hold down (D) with two carriage bolts,
washers and knobs (O).
Fig 11
Attach the Table Inserts:
Always use the smallest table insert possible.
Assemble the Mitre Gauge (Fig 12):
Fig 12
5.3 Dust connection
Before initial operation, the machine must be connected to a
dust extractor. The suction should switch on automatically
when the router is switched on.
5.4 Mains connection
For safety reasons the router must be connected to the
magnetic switch (J, Fig 13‐1).
This assures a safe On/Off‐operation and avoids auto‐restarting
after power failures.
Make sure the router switch is in the OFF‐position before you
plug in.
