Jet JPT-310HH, Operating Instructions Manual

Page: 9 / 45

Unparallel side to side
*table not parallel to cutterblock-
adjust table parallel.
Work piece jams
*Too much material removed in one
pass-
make several passes.
*Resin build-up on tables-
clean and wax table surfaces.
*Surface of feed rollers too smooth-
clean infeed roller with brush
roughen out feed roller with
sandpaper.
Planer table difficult to adjust
*Lack of lubrication-
lubricate excenters and guides.
Thickness table difficult to adjust
*Lack of lubrication-
lubricate central post and screw.
*Thickness table lock is on-
loosen lock handle
Poor machining power
*Main drive belt slipping-
tighten or replace belt.
*Resin build-up on tables-
clean and wax table surfaces.
*dull carbide inserts-
rotate or replace inserts
10. Environmental protection
Protect the environment.
Your appliance contains valuable
materials which can be recovered or
recycled. Please leave it at a
specialized institution.
11. Available accessories
Stock number 1791212
Set of 10 carbide inserts
Stock number 10000291
Digital thickness readout (Fig 12)
Fig 12
Stock number 708118
Mobile base 250kg
(Fig 13, for JPT-310HH only)
Fig 13
Stock numer 10000296
Mobility kit with tommy bar (Fig 14, Fig
15)
Fig 14
Fig 15
Stock number 6285917
Push block
Stock number 709207
Foldable roller stand.
12. Safe operation
See appendix A (on the last pages of
this operating manual)
A1: Planing, stock thickness below
75mm
A2: Edge jointing
A3: Planing of narrow gibs
A4: Planing of short stock with push
wood.