13
12
COMMUNICATION
CONNECTING COMMUNICATION CABLE
Turn off power and then connect the accessory
cable between the RS232 COM port of PC and
torque wrench.
UPLOADING RECORD DATA
Make sure the connection between PC and
wrench is working.
Press
together to reset the wrench.
Change the wrench operation mode to “
Send
”.
(Please refer to “
Peak Hold Mode Recorded
Value Review
” section)
Use PC to start the uploader program.
In uploader program, first select the correct
COM port No.
Next, select the file path to save the uploaded
data.
Finally, press “upload” button to transmit the
torque records to PC.
The uploaded data is saved as a *.csv file. Use
Microsoft Excel to view *.csv file.
Precaution:
1. Communication function is only supported
on some models. Check the model no. and
its specification before using communication
function.
2.
Do not insert the plug of communication
cable into torque wrench that does not
support communication function.
CAUTIONS:
Refer to the uploader program user guide
for detailed instructions.
