Jet JDP-20EVS, Operating Instructions And Parts Manual

Page: 5 / 32

5
•
Arsenic and chromium from chemically treated lumber.
Your risk of exposure varies, depending on how often you do this type of work. To reduce your
exposure to these chemicals, work in a well-ventilated area and work with approved safety
equipment, such as face or dust masks that are specifically designed to filter out microscopic
particles.
Introduction
This manual is provided by JET, covering the safe operation and maintenance procedures for a JET Model
JDP-20EVS Drill Press. This manual contains instructions on installation, safety precautions, general operating
procedures, maintenance instructions and parts breakdown. This machine has been designed and constructed
to provide years of trouble free operation if used in accordance with instructions set forth in this manual. If there
are any questions or comments, please contact either your local supplier or JET. JET can also be reached at
our web site: www.jettools.com.
Specifications
Model Number ........................................................... JDP-20EVS/230 ......................................... JDP-20EVS/460
Stock Number ......................................................................... 354210 ....................................................... 354212
Drilling Capacity
Cast Iron (in.) ......................................................................... 1-1/2 ........................................................... 1-1/2
Steel (in.) ................................................................................ 1-3/8 ........................................................... 1-3/8
Column Diameter (in.) ................................................................. 4-1/2 ........................................................... 4-1/2
Spindle to Column (maximum – in.) ........................................ 10-7/16 ....................................................... 10-7/16
Spindle Travel (in.) ............................................................................ 6 ................................................................. 6
Spindle Taper ..............................................................................MT-3 ........................................................... MT-3
Max. Distance Spindle to Table (in.) .......................................... 30-1/4 ......................................................... 30-1/4
Max. Distance Spindle to Base (in.) ........................................ 43-5/16 ....................................................... 43-5/16
Table:
Overall Size (in.) ........................................................... 22 x 18-3/4 ................................................. 22 x 18-3/4
Working Surface (in.) ............................................. 18-1/8 x 14-3/4 ........................................... 18-1/8 x 14-3/4
Table Travel (in.) ......................................................................... 18 ............................................................... 18
Number of T-Slots ........................................................................ 2 ................................................................. 2
Table T-Slot Size (in.) ............................................................... 5/8 .............................................................. 5/8
Table T-Slot Centers (in.) ..................................................... 7-7/16 ......................................................... 7-7/16
Base:
Overall Size (LxWxH/in.) ............................ 27-1/2 x 19-1/4 x 6-1/8 ............................... 27-1/2 x 19-1/4 x 6-1/8
Base Work Table (in.) ........................................ 14-3/4 x 11-13/16 ....................................... 14-3/4 x 11-13/16
Number of T-Slots ........................................................................ 2 ................................................................. 2
Base T-Slot Size (in.) ................................................................ 5/8 .............................................................. 5/8
Base T-Slot Centers (in.) ...................................................... 7-7/16 ......................................................... 7-7/16
Number of Spindle Speeds .................................................... Variable ...................................................... Variable
Range of Spindle Speeds (RPM) .......................................... 65-2,000 ..................................................... 65-2,000
Main Motor ...................................... TEFC 2HP, 3PH,
230V Only, 7A ............ TEFC 2HP, 3PH, 460V Only, 3.5A
Coolant Motor ...................................................................1/8 HP, 1Ph ................................................ 1/8 HP, 3Ph
Overall Height (in.) .................................................................... 83-3/4 ......................................................... 83-3/4
Net Weight (approx. – lbs.) ........................................................... 722 ............................................................. 722
Floor Space Required (LxW/in) ............................................... 37 x 37 ....................................................... 37 x 37
The above specifications were current at the time this manual was published, but because of our policy of
continuous improvement, JET reserves the right to change specifications at any time and without prior notice,
without incurring obligations.