6
JCP Cable Puller Trouble-Shooting
Trouble Possible
Cause Remedy
Puller will not ratchet.
1. Broken spring (L).
2. Broken ratchet tooth.
3. Frame bent.
1. Replace cable puller.
2. Replace cable puller.
3. Replace cable puller.
Puller will not ratchet in.
1. Pawl (D) not in correct
position.
2. Spring (L) damaged.
1. Move forward/reverse latch
(B) to position as shown by solid
line.
2. Replace cable puller.
Puller will not ratchet out.
1. Pawl not in correct position.
2. Spring (L) damaged.
3. Wire rope incorrectly spooled
onto ratchet drum.
1. Move forward/reverse latch
(B) to position as shown by
dotted line.
2. Replace cable puller.
3. Remove wire rope and rewind
onto drum under tension.
