background image

 6

Collection bags: 
 Bag 

material 

..................................................................................................................................... polyethylene 

  Drum collection bag size (Dia. x L) ................................................................ 38-9/16 x 47-1/4 (980 x 1200 mm) 
  Canister collection bag size (Dia. x L) ...................................................... 19-11/16 x 23-5/8 in. (500 x 600 mm) 
 
Main materials: 
 Frame 

................................................................................................................................................ steel  tubing 

 Body 

.................................................................................................................................................. 18 ga. steel 

 Paint 

finish 

....................................................................................................................................... powder coat 

 
Dimensions: 
  Footprint/base dimensions (L x W) ................................................................. 57  x  30-7/16 in. (1450 x 772 mm) 
  Overall dimensions, assembled (L x W x H) ............................... 30-7/16 x 57 x 88 in. (772 x 1450 x 2235 mm) 
  Overall dimensions, shipping carton (L x W x H) .............. 54-3/4  x  30-1/8 x 38-9/16 in. (1390 x 765 x 980 mm) 
   
Weights (approximate):

  

  Net weight, full kit assembled ..................................................................................................... 242 lb. (110 kg) 
  Net weight, (base machine only) ................................................................................................ 220 lb. (100 kg) 
  Net weight, (canister filter only) ...................................................................................................... 22 lb. (10 kg) 
  Shipping weight (base machine only) ......................................................................................... 268 lb. (122 kg) 
  Shipping weight (canister filter only) ............................................................................................... 33 lb. (15 kg) 

 

The specifications in this manual were current at time of publication, but because of our policy of continuous 
improvement, JET reserves the right to change specifications at any time and without prior notice, without incurring 
obligations. 

 

 

 

 

Summary of Contents for JCDC-3





















Reviews: