Jet J-9180, Operating Instructions And Parts Manual

Page: 6 / 28

6
Introduction
This manual is provided by WMH Tool Group covering the safe operation and maintenance procedures
for a JET Model J-9180 zip-miter bandsaw. This manual contains instructions on installation, safety
precautions, general operating procedures, maintenance instructions and parts breakdown. This machine
has been designed and constructed to provide years of trouble free operation if used in accordance with
instructions set forth in this manual. If there are any questions or comments, please contact either your
local supplier or WMH Tool Group. WMH Tool Group can also be reached at our web site:
www.wmhtoolgroup.com.
The JET Model J-9180 bandsaw is designed for medium production cut-off work. Two cutting speeds and
a hydraulic feed control allow the efficient cutting of virtually any material.
The Model J-9180 bandsaw is equipped with a coolant system which can greatly extend blade life and
speed the cutting of a variety of materials which are best cut with cutting fluids and coolants.
Specifications
Model.................................................................................................................................................... J-9180
Stock Number ..................................................................................................................................... 414464
Cutting Capacity
Round at 90° (in.) ..................................................................................................................................... 7
Round at 45° (in.) ...............................................................................................................................4-1/2
Round at 60° (in.) ...............................................................................................................................2-3/4
Rectangle at 90° (in.) ................................................................................................................... 7-7/8 x 6
Rectangle at 45° (in.) ...........................................................................................................4-7/8 x 4-5/16
Rectangle at 60° (in.) .............................................................................................................2-3/4 x 2-3/4
Blade Size (in.)........................................................................................................................ 3/4 x. 035 x 82
Blade Speeds (SFPM) ...................................................................................................................... 137, 275
Blade Wheel Diameter (in.) ...................................................................................................................10-1/2
Coolant Capcity (qt.) ................................................................................................................................... 10
Bed Height (in.) .....................................................................................................................................35-7/8
Motor ..................................................................................................................................... 1HP, 230V, 3Ph
Floor Space Required (L x W x H)(in.).................................................................................. 44 x 22 x 29-1/2
Net Weight (lbs.) ....................................................................................................................................... 375
The above specifications were current at the time this manual was published, but because of our policy of
continuous improvement, WMH Tool Group reserves the right to change specifications at any time and
without prior notice, without incurring obligations.