8
The JET Model J-2221VS and J-2223VS drill
presses feature manual speed control. Models
J-2232AC and J-2234AC have inverter speed
control. This manual contains procedures for
both speed control versions. The manual
provides separate instructions when differences
in operation and maintenance exist.
Refer to Figures 1 and 2 for key features of the
drill press.
Operation and Set-Up
Securing the Base
The base of the drill press has four mounting
slots; two slots on both sides of the base. The
drill press should be level and rest solidly on the
floor. Place shims under the four mounting slots
in the base as needed to level the drill press.
When securing the base to the floor, apply even
torque to the fasteners to prevent distortion of
the base.
Figure 1
Figure 2
Drill Press Features
Drill Press Features
(Manual Speed Control Model)
(Inverter Speed Control Model)
Summary of Contents for J-2221VS
Page 28: ...28 Wiring Diagram Models J 2221VS and J 2223VS ...
Page 29: ...29 Wiring Diagram Models J 2232AC and J 2234AC ...
Page 30: ...30 NOTES ...
Page 31: ...31 ...
