Jet GH-1440, Operating Instructions And Parts Manual

Page: 7 / 68

7
GH-1440-1 GH-1440-3
Tailstock
Tailstock spindle travel 4-3/4 in. (121 mm)
Diameter of tailstock spindle 1-3/4 in. (45 mm)
Taper in tailstock spindle MT3
Main materials
Headstock Cast iron
Bed Cast iron
Apron/Saddle Cast iron
Tailstock Cast iron
Splash guard Steel
Stand Steel
Dimensions
Bed width 10-3/16 in. (259 mm)
Bed length 54-1/2 in. (1384 mm)
Height of bed from floor 12-3/4 in. (324 mm)
Overall dimensions, L x W x H 74-4/5 x 28 x 46 in. (1900 x 635 x 1168 mm)
Shipping dimensions, L x W x H 78-3/8 x 30 x 55 in. (1990 x 760 x 1400 mm)
Weights
Net weight, approx. 2,116 lb (960 kg)
Shipping weight, approx. 2,336 lb (1060 kg)
1
subject to local and national electrical codes.
2
The specified values are emission levels and are not necessarily to be seen as safe operating levels. As workplace
conditions vary, this information is intended to allow the user to make a better estimation of the hazards and risks
involved only.
L = length, W = width, H = height, TPI = threads per inch
n/a = not applicable
The specifications in this manual were current at time of publication, but because of our policy of continuous
improvement, JET reserves the right to change specifications at any time and without prior notice, without incurring
obligations.
4.1 Cross Slide T-slot dimensions
These dimensions (in millimeters) can be used to cut an appropriately sized block for a quick change tool post.
Figure A1