Fig 3
Motor assembly:
With the motor base, collector body &
fan/motor assembly in place, secure it
to the base plate using the screw and
washers provided as shown in Fig 4
Fig 4
Packing & Square Connecting
assembly:
Install the packing and Mount the
outlet, connector to the collector body
assembly using screw and washers
provided. Fig 5 & Fig 6.
Fig 5
Fig 6
Connector Housing:
Attach 3 support brackets (A, Fig 7) to
the base using 6 hex cap screws and
washers.
Fig 7
Install the housing (A, Fig 8) with 6 hex
cap screws.
Fig 8
Hose:
Attach the hose (A, Fig 9) with 2
provided clamps (B).
Fig 9
Install the filter bag(DC-1200):
Attach the loop of the filter bag to the
filter bag hanger (M).
Place the filter bag (A) over the bag
support housing.
Place a bag clamp (B) over the bag
and close the clamp.
Fig 10
Note: make sure the bag is fastened
securely so that no dust will escape
during operation.
Canister filter (DC-1200CK):
Mount the handle (I, Fig 10A) with
screw (J), flat wasshers (H) .
Fig 10A
Install the collection bag:
Place a collection bag (E) over the bag
support housing.
Place a bag clamp (B) over the
collection bag and close the clamp.
