5-10 - PUMP UNIT
90-852396 MAY 1996
Servicing Stator, Impeller
and Wear Ring
Disassembly
1. Disconnect spark plug leads from spark plugs.
2. Disconnect shift and steering cables at Reverse
gate and Rudder.
54896
a
b
a - Shift Cable
b - Steering Cable
IMPORTANT: This procedure lists the dissas-
sembly of external pump components. If servic-
ing a specific component, follow the procedure in
that section.
REMOVING REVERSE GATE, RUDDER AND
NOZZLE AS AN ASSEMBLY
3. Remove four screws securing nozzle to stator.
Remove reverse gate/rudder/nozzle assembly.
54579
c
c - Screws (4)
STATOR REMOVAL
4. Remove two screws securing trim plate to ride
plate and wear ring.
28252
a
b
a - Screws (2) to Trim Plate & Wear Ring
b - Trim Plate
5. Remove four screws securing stator assembly to
drive housing. Remove stator assembly.
28253
c
c - Stator
6. Drain stator by tilting stator forward and allowing
the oil to drain over the impeller shaft seals.
Complete oil draining by removing stator fill
screw and pour the remaining oil out the fill screw
hole.
Summary of Contents for 91-809957A1
Page 1: ...5 28237 JET PUMP ...
