PN 115.04.7706 - INSTRUCTION MANUAL OF GPU JET-POWER DIESEL 90kVA - 115VAC, 400Hz / 28VDC, 2500A - PN 115.09.7701.
GPU JET-POWER DIESEL 90kVA – 115VAC, 400Hz / 28VDC, 2500A – PN 115.09.7090 4/40
His commands are simple to operate and can be used by anyone working in the support area
by simply pressing a pushbutton "Start" on the console to put into operation and a "Stop" to
shutdown. The entire boot process, initial idling, gradual acceleration with little smoke, power
generation and measurement is done automatically and is ready to meet aircraft. For shutdown
also the process is automatic, keeping the engine running without load, at idle for 3 minutes.
It was designed for use on aircraft (airplanes and helicopters), and external power supply for
aircraft maintenance, operation and departure of the turbines.
The "JET-POWER 115V 400Hz 90KVA DIESEL", is composed of two units in the same
chassis:
- DIESEL GENERATOR GROUP with output of 115 / 200V, 400Hz, 90KVA.
- MÓDULO OF ELECTRIC GPU "JET POWER 28VDC" Input 115 / 200V, 400Hz and
output 28 VDC, up to 2500A (When equipped with the optional "Output 28VDC").
This equipment provides the output voltage of 115 / 200V 400Hz directly from the generator
and is the 28VDC power from the GPU, powered by the generator. If necessary service
115VAC to 28VDC and at the same time, the two outputs can operate simultaneously, and it
can also provide energy to power up to two external special GPU's with entry 115 / 200V,
400Hz and output 28VDC until 2500A. (Not to be bound normal electrical GPU's having input
220 / 380V, 60Hz).
His commands are simple to operate and can be used by anyone working in the area of support
by simply switching on and off.
It is important to follow the hours worked intervals to exchange engine oil, filter cleaning,
retightening, etc. (Every 400 hours, change the oil and filters).
.
The "JET-DIESEL POWER 115V, 400Hz, 90KVA", is manufactured in strict technical
standards and modern industrial technology, using components and high quality raw material
to ensure its efficiency, safety and durability.
Its structure and bodywork are designed in 3D system, cut by laser and bent on CNC machines
of high precision, with all the included drilling. Has no craft items. All can be exchanged at
any time, without need for adjustments. Your resined electronic circuit is drawn and salt
corrosion-proof, air and moisture.
1.1.2 - TECHNICAL INFORMATION MODULE "JET-POWER 28VDC".
1.1.2.1
- ENTRY: 115/200 V, three-phase, 400Hz.
1.1.2.2 - OUTPUT: 27 to 32 Volts, with external adjustment of the output voltage in the same knob
which adjusts the voltage of 115VAC, 400 Hz.
1.1.2.3
- MAXIMUM CURRENT: 2500 Amps peak for 10 seconds;
1,500 Amps peak for 30 seconds;
400 Amps, continuous.