25
6. OPERATION
6.1 ADJUSTMENT OF PITCH ANGLE
Your product is already delivered with an optimally set pitch angle. However,
you can adjust the screen angle within a range of 0
– 30° according to your
individual requirements.
Once you have achieved the highest possible pitch range, the loop will not
turn any farther. Do not try to force it! Failure to follow this instruction can
damage the flex pitch shoulder and void the warranty.
Do not extend the awning further than ¼ of its full length before adjusting.
Misplacing and misassembling of the awning can cause danger.
Only mount the awning yourself if you fully understand the
instructions and if you are sure that the mounting ground is suitable.
Adjusting-
area
Safety nut
Adjusting screw
Plastic cap
Safety nut
The pitch angle can be
adjusted on all arms
in the adjusting area
(between 0° and 30°).
Take off the plastic caps
and loosen the locking bolts
with a 14 mm wrench.
Turn the adjusting screw clockwise to decrease
the pitch angle and turn it counter-clockwise to
increase the pitch angle.
Once the requested angle is achieved,
you can tighten the safety nuts and
put the plastic caps back on.
