4
To lock your
BOSCH 1617 EVS – PLUNGE BASE
Figure 13
Figure 14
Special Instructions:
Handles need to be removed. Depth stop knob and
bar need to be removed
.
Mounting Screws:
Three (3) 6mm x 25 mm (included)
Three (3) 6mm hex nuts (included)
BOSCH 1617 EVS – FIXED BASE
Figure 15
Figure 16
Special Instructions:
No special instructions for this router
Mounting Screws:
Four (4) 4 mm x 10 mm (included)
MAKITA RP 2301FC
Figure 17
Figure 18
Special Instructions:
Remove the handle without the switch. Leave sub-base
on when mounting to the carriage.
Mounting Screws:
Four (4) 4mm x 16mm
HITACHI M12V & M12V2
Figure 19
Figure 20
Special Instructions:
Remove Turret stop adjustment knob.
Remove handle that does not have speed adjustment.
Lower the Lift carriage before installing and removing from
your table top.
Mounting Screws:
Four (4) 5mm x 10mm (included)
FESTOOL OF 1400
Figure 21
Figure 22
Special Instructions:
No Special Instructions
Mounting Screws:
Two (2) 6mm x 14mm (included)
Five (5) 4 mm x 8mm (included)
