2
Hitachi M12V & M12V2
1
DeWalt 625, ELU 3337-9
2
Bosch 1617, 1604
3
Bosch 1617, 1613 (Thru Hole)
4
Makita RP2301FC
5
Festool OF 1400 EQ
6
Festool OF 1010 EQ
7
Table 1
6.
Slide the carriage back on to the lift.
7.
With two ¼-20 x 1-1/2” Cap screws you removed in
Step 1, re-engage into the left carriage bracket.
(Figure
6)
ROUTER LEGEND
1.
Remove the five (five) 1-1/2” Cap Screws and
one
(1) 1” Cap Screw from the carriage
brackets
(Figure 2 and 3).
2. Remove the carriage plate from the Lift.
3. Turn the carriage plate over and locate your router
from
the legend on the top of the plate. See Figure 4
and
Table 1.
INSTALLING THE ROUTER – SEE INDIVIDUAL
ROUTER ADJUSTMENTS ON PAGES 3 & 4 PRIOR TO
INSTALLING YOUR ROUTER
Place the crank handle into the hex hole in the lift’s
dia
on the top plate. Crank the lift carriage down
approximately
1
inch
from the top plate. You will
need a little bit of room to remove the carriage plate
from the
Rout
-R-Lift
™
Prestige. (Figure 1)
Your Rout-R-Lift
™
Prestige is predrilled for many
routers. The first step is to remove the carriage plate
from the
l
ift.
Router
Hole
Pattern
Figure 1
Figure 2
Figure 3
Figure 5
Each router has a unique hole pattern. For example, if
you have a Hitachi M12V, locate all the #1 holes on the
carriage plate. These will be your mounting holes.
4.
With the router upright, place the carriage plate on
the router base and align the hole pattern in your
base with the corresponding # on the carriage
plate
(provided you have one of the noted routers).
Keep in
mind your handle location of your router.
The
handles should be roughly in line with the two
engraved lines on the carriage plate (the side with
the
engraved circles)
5.
Once aligned; with the screws provided, tighten the
Rout-R-Lift
™
Prestige carriage to your router.
(
See
Figure
5)
Figure 4
