Jepson HDC 8203E, Operating Instructions Manual

Page: 14 / 100

7.3. TRANSPORT
The contained lithium-ion batteries are subject to
the Dangerous Goods Legislation requirements.
The user can transport the batteries by road without
further requirements.
When being transported by third parties (e.g.:
air transport or forwarding agency), special
requirements on packaging and labelling must
be observed. For preparation of the item being
shipped, consulting an expert for hazardous
material is required.
Dispatch batteries only when the housing is
undamaged. Tape or mask off open contacts and
pack up the battery in such a manner that it cannot
move around in the packaging.
Please also observe possibly more detailed national
regulations.
7.4. DISPOSAL OF RECHARGEABLE
BATTERIES/BATTERIES
The machine, rechargeable batteries,
accessories and packaging should be
sorted for environmental-friendly
recycling.
Do not dispose of power tools and batteries/
rechargeable batteries into household waste!
Only for EC countries:
According to the European Guideline
2002/96/EC, power tools that are no
longer usable, and according to the
European Guideline 2006/66/EC, defective or
used battery packs/batteries, must be collected
separately and disposed of in an environmentally
correct manner.
Li-Ion:
Please observe the instructions in
section „7.3 Transport“.
Subject to change without notice.
8. QUOTATION
When returning a defective machine for repair with
cost estimate. We charge a handling fee of 50€, but
does not apply if a repair order or purchase of a new
machine is given.
9. SPARE PARTS
For current spare parts list with order numbers
please visit our website:
www.drycutter.com
10. WARRANTY
The warranty time (warranty according to the
commercial code) is 12 months from the day of sale
to the end consumer.
It covers and is limited to the free replacement
of the defective parts or the free repair of defects
that are demonstrably due to the use of imperfect
materials during production or due to assembly
errors.
Incorrect use or start-up and unauthorized instal-
lations or repairs not specified in the operating
instructions void the warranty. Parts that are subject
to wear are also excluded from the warranty. We
expressly reserve the right to make decisions on
the warranty application. The warranty is void if
the device is opened by a third party. Transport
damages, maintenance work as well as damage and
malfunctions due to insufficient maintenance are
not covered by the warranty.
For warranty claims, the proof of purchase of the
device must be given by presenting the delivery
note, bill, or cash receipt.
As far as it is legal, we assume no liability for any
personal, material or consequential damages, in
particular if the device is used differently than for
the purpose indicated in the operating instructions,
not installed or repaired according to the operating
instructions, or repairs were executed by a
layperson.
We reserve the right to perform repairs or
maintenance over and above the ones specified in
these operating instructions at the factory.
The quality and safety of the JEPSON POWER
circular cold saw depends on the exclusive use of
original JEPSON POWER saw blades or saw blades
with the same cutting width, blade diameter and
recommended cutting speed. The use of other saw
blades may damage the machines.
The original JEPSON POWER saw blade fulfils all
requirements of the TÜV examination (several
inspection offices) and is therefore certified by these
inspection offices. In case of use of saw blades with
dimensions that differ from the original JEPSON
POWER saw blades, the manufacturer assumes no
liability.
ENGLISH
14