Jepson HDC 8203E, Operating Instructions Manual

Page: 11 / 100

EN
DE
FR
NL
ES
PT
IT
and skin contact when working with these
materials. Request, and follow, any safety
information available from your material
supplier.
17. There are certain applications for which
this tool was designed. The manufacturer
strongly recommends that this tool NOT be
modified and/ or used for any application
other than for which it was designed. If
you have any questions relative to its
application DO NOT use the tool until you
have written the manufacturer and have
been advised.
Metal chips are often very sharp and hot. Never
touch them with bare hands. Clean up with a
magnetic chip collector and a chip hook or other
appropriate tool.
6. FUNCTIONAL DESCRIPTION
This machine is a dry cutting circular saw designed
to cut ferrous metals, which uses carbide tipped saw
blades. The saw should only be used with original
Jepson Power saw blades.
6.1. UNPACKING
Carefully remove the tool and all loose items from
the shipping container. Retain all packing materials
until after you have inspected and satisfactorily
operated the machine.
6.2. CARTON CONTENTS
1. Metal cutting saw HDC 8203E
2. Original Jepson Power carbide tipped LBS saw
blade 203/48T
3. 2x 18V LiHD 5.5A high-performance battery
4. Air-Cooled LiHD charging station
5. Rip fence cutting guide
6. Hex wrench
6.3. CHARGING THE RECHARGEABLE
BATTERY
Check whether the rated voltage of the
rechargeable battery agrees with the information
specified on the machine.
Rechargeable battery and charger are matched to
each other. Only use the Jepson Power Air-Cooled
LiHD chargers for recharging.
Before using a new machine, first of all charge the
rechargeable battery.
A description of how to start up and charge the
Jepson Power Air-Cooled LiHD charger can be
found in the appended instructions “Jepson Power
Air-Cooled LiHD charging station”.
The rechargeable battery is equipped with a
temperature monitoring system. This guarantees
that the rechargeable battery is only charged in
the temperature range between 0°C and 50°C. This
achieves a long service life for the rechargeable
battery.
A considerably shortened operating time per
charging procedure indicates that the rechargeable
battery is spent and needs to be replaced.
WARNING!! Explosion hazard
Protect the rechargeable battery
from heat, fire and moisture.
Do not place the rechargeable
battery onto heating appliances and do not
expose the rechargeable battery to strong
solar radiation for a longer period of time.
Temperatures above 50°C are detrimental to the
rechargeable battery. Allow a heated rechargeable
battery to cool down before charging it.
The optimum storage temperature ranges between
10°C and 30°C.
CAUTION!! Do not open the
rechargeable battery and protect it
from impacts. Keep the rechargeable
battery in a dry and frost-proof place.
WARNING!! Cover the rechargeable
battery’s contacts if it is stored
outside the charger. There is a fire and
explosion hazard in case of a short
circuit caused by metallic bridging.
Follow the instructions for the
protection of the environment.
6.4. FITTING THE RECHARGEABLE BATTERY
Slide the charged rechargeable battery into the
battery guide next to the handle until it perceptibly
engages.
CAUTION!! Before using the machine,
convince yourself that the
rechargeable battery is firmly seated
in the machine.
ENGLISH
11