Inserting the Garmin Datacard
Place the Skybound USB adapter right-side up with the
Jeppesen
logo displayed. When you insert the
card into the Skybound USB adapter, the black side should be facing up (with the label), and the end with
two rows of holes goes into the adapter.
WARNING
Mishandling of the unit or improper installation of the datacard may cause damage to
the Skybound USB adapter or the datacard.
Adapter Light Behavior
The following identifies the blue light behavior of the Skybound USB adapter:
•
Turns off when the Skybound USB adapter is connected to a USB port with JSUM closed.
•
Displays a static light when the Skybound USB adapter is connected to a USB port with JSUM
running.
•
Flashes slowly (approximately 1 flash every 2 seconds) when the Skybound unit is detected after
selecting a service to program. It also flashes at the same rate during the erasing stage of the
program process.
•
Flashes quickly (approximately 3 flashes per second) during the programming stage of the
program process.
•
Flashes rapidly during the blank checking and verifying stage of the program process.
