jenway 3345 Operating Manual Download Page 8

Page: 8 / 53

2.3 DISPLAYS

PRIMARY DISPLAY

sensor 1 display currently selected as primary reading. Units
of measurement andcalibration point will also be shown at
the side of the main display.

TEMPERATURE DISPLAY -

sensor 1 temperature display. Selected measurement unit and
MAN to indicate manual temperature will be shown at the
side of the display.

ENDPOINT SYMBOL

displayed once a stable reading is detected and is maintained
until the input changes.

ERROR MESSAGES

displays error messages for sensor 1.

MENU

used for selection of modes of operation. The selected
mode is reverse highlighted .

ICONS

used in pH and Ion modes to prompt steps of calibration and
sample measurement.

ERROR MESSAGES

displays error messages for sensor 2.

TEMP. DISPLAY

sensor 2 temperature display. Selected measurement unit and
MAN to indicate manual temperature will be shown at the
side of the display.

SECONDARY DISPLAY

sensor 2 display currently selected as secondary reading.
Units of measurement andcalibration point will also be shown
at the side of the main display.

10.

REAL TIME CLOCK

giving continuous display of hours, minutes and seconds or
day, m onth and year. All logged results are automatically
time stamped.

3345/REV A/08-99

Summary of Contents for 3345






















































Search results

Summary of Contents for 3345

Reviews:

Related manuals for 3345

Brands by name

Popular brands

jenway 3345, Operating Manual

Search results

Summary of Contents for 3345

Reviews:

Related manuals for 3345

Brands by name

Popular brands