JENTNER DIGITAL II, Operating Instructions Manual

Page: 3 / 9

Side 3 – Operating Instructions DIGITAL II Version 2.0
Operating elements
❶ Button „Start/Standby “
❷ Button “Motor/Movement “
❸ Button „Heizung/Heater 1“
❹ Button „Heizung/Heater 2“
❺ Control panel / display
❻ Button “Temp” – setting temperature
❼ Button “Volt” – setting voltage
❽ Button “Charge” – setting Amin (charge)
❾ Button “Time” – setting of exposure time
❿ Button “Basin” – selection of the working tank
⓫ Button “OK” – save of the set values
⓬ Button “Prog” – selection of the working program
⓭ Rotary button for selection of parameters and values
⓮ Connection socket “red” for plating pen (anode)
⓯ Connection socket “bl ue ” for tweezers/clamp (cathode)
⓰ Tanks (8 pieces)
⓱ Anode rods (2 x)
⓲ Cathode rod