Jensen VM9725BT, Operating Instructions Manual

Page: 65 / 235

65
VM9725BT
Answering an Incoming Call
To answer an incoming call touch the icon. For best reception, speak loudly and
clearly into the microphone. To end the conversation, touch the
icon.
Rejecting an Incoming Call
Press the Transfer to Phone icon to reject an incoming call. The call will revert to
your mobile phone and be left for voice mail.
Volume Control
To increase or decrease the volume level of an incoming call, turn the rotary knob
on the front panel or press the
VOL +/ - buttons on the remote control.
Audio Mute
To mute the phone call audio from the unit when a call is received, press the front
panel rotary knob. Press the front panel rotary knob again and phone call audio
will be restored to the unit.
Making an Outgoing Call
Outgoing calls can be performed by direct dialing using the unit’s touch screen
keypad. The keypad screen is accessed by touching the
Direct Entry icon .
Direct Dialing
1. Touch the Direct Entry icon and the following screen will appear:
2. Using the keypad, touch 0-9,*, # to enter the phone number you wish to dial.
If you enter an incorrect number touch the red X icon on the keypad to delete
the incorrect number.
3. Once the correct number appears on the screen touch the icon. To exit the
direct entry screen touch the X icon in the upper right corner of the screen.
4. To end the call touch the icon on the previous screen.