Jensen VM9725BT Operating Instructions Manual Download

Page: 52 / 235

VM9725BT

Pausing/Resuming Playback

Touch the icon to pause playback. Touch the icon to resume playback.

Moving Through Tracks

Touch the Next (

) icon to advance to the next track on the MP3 disc/USB

device. Touch the Previous (

) button to move to the previous track on the MP3

disc/USB device.

Repeat Playback

Touch the

(Repeat) icon to alter repeat mode as follows: Repeat Single >

Repeat Folder > Repeat All > Repeat Off

NOTE: CD-R and CD-RW will not play unless the recording session is finalized.

Random Play Select

Touch the

(Random) icon to play the tracks on the MP3 disc/USB device in a

random, shuffled order. Touch the

icon again to cancel Random Play mode.

Summary of Contents for VM9725BT












































































































































































































































Search results

Summary of Contents for VM9725BT

Reviews:

Related manuals for VM9725BT

Brands by name

Popular brands

Jensen VM9725BT, Operating Instructions Manual

Search results

Summary of Contents for VM9725BT

Reviews:

Related manuals for VM9725BT

Brands by name

Popular brands