Jensen VM9424 Operating Instructions Manual Download Page 31

Page: 31 / 130

VM9424

VCD PBC - Play Back Control

For VCDs with play back functionality, play back control (PBC) provides
additional controls for VCD playback.

Press the

ROOT

button (21) on the remote control to toggle the PBC function

“On”/”Off”. Once PBC is on, playback starts from track one of the play list.

NOTE: When PBC is activated, fast forward/reverse, and previous/next
track are available. Repeat is not available.

NOTE: For VCD play, the repeat function is not available if PBC is on.

Playback Information

During DVD and VCD playback, press the

INFO

button (10) on the remote

control to display playback information on the screen, including the media
playing and current playback time.

MPEG Playback On-Screen Controls

To access the on-screen controls, touch the screen while a MPEG file is
playing. The following on-screen controls appear at the top and bottom of the
screen:

•

INFO

: View on-screen playback information

•

: (x1) Repeat section start point A, (x2) repeat section end point B, (x3)

stop repeat section

•

: (x1) Repeat Chapter, (x2) Repeat Title, (x3) Repeat Off

•

: Exit DVD mode and view Source menu

•

: Fast reverse (x2

x16

Play)

•

/||

: Play/pause

•

: Fast Forward (x2

x16

Play)

•

: Stop

INFO

R
A

Summary of Contents for VM9424



































































































































Search results

Summary of Contents for VM9424

Reviews:

Related manuals for VM9424

Brands by name

Popular brands

Jensen VM9424, Operating Instructions Manual

Search results

Summary of Contents for VM9424

Reviews:

Related manuals for VM9424

Brands by name

Popular brands