Jensen PS2130 - Amplifier, Installation & Operation Manual

Page: 7 / 16

PS260 / PS285 / PS2130 / PS2180
7
4 ohm nominal
2 ohm minimum
4 ohm nominal
2 ohm minimum
4 ohm minimum
C
L
L C
Inductor Capacitor
Wiring (continued)
Speaker Wiring
The Speaker Wiring diagrams illustrate the following four options for connecting speakers and
subwoofers to the PS amps:
• Two Speakers
• Two Subwoofers
• Bridged Subwoofer
• Tri-Mode
Note: When running a subwoofer and two full-range speakers together (tri-mode
operation), passive high and low pass filters must be used. Failure to install these filters
may cause damage to the amplifier and/or the speakers.
Two Speakers
Dos Altavoces
Deux Haut-Parleurs
Two Subwoofers
Dos Subwoofers
Deux Subwoofers
Bridged Subwoofer
Subwoofer en Puente
Subwoofer En Pont
Tri-Mode
Tri-Modoa
Tri-Mode
Passive High and Low Pass Filter Chart
Frequency
Hz.
Speaker Impedance
2 Ohms 4 Ohms 8 Ohms
Inductor (L) Capacitor (C) Inductor (L) Capacitor (C) Inductor (L) Capacitor (C)
80 4.1mH 1000
µ
F 8.2mH 500
µ
F 15mH 250
µ
F
100 3.1mH 800
µ
F 6.2mH 400
µ
F 12mH 200
µ
F
130 2.4mH 600
µ
F 4.7mH 300
µ
F 10mH 150
µ
F
200 1.6mH 400
µ
F 3.3mH 200
µ
F 6.8mH 100
µ
F
250 1.2mH 300
µ
F 2.4mH 150
µ
F 4.7mH 75
µ
F
400 0.8mH 200
µ
F 1.6mH 100
µ
F 3.3mH 50
µ
F
600 0.5mH 136
µ
F 1.0mH 68
µ
F 2.0mH 33
µ
F
800 0.41mH 100
µ
F 0.82mH 50
µ
F 1.6mH 26
µ
F
1000 0.31mH 78 µ F 0.62mH 39 µ F 1.2mH 20 µ F
1200 0.25mH 66
µ
F 0.51mH 33
µ
F 1.0mH 16
µ
F
1800 0.16mH 44
µ
F 0.33mH 22
µ
F 0.68mH 10
µ
F
4000 0.08mH 22
µ
F 0.16mH 10
µ
F 0.33mH 5
µ
F