POWER 5500 5-Channel Amplifier
3
Installation
Before you begin the installation of your Power 5500 amp remember, there are
two ways to do things – right and twice! Use the proper installation techniques,
tools and accessories to ensure that your Jensen Power series amp will put
out all the power it was designed to. If necessary, seek a professional installer
to have the amplifier installed correctly. Most mobile amp installations do not
have the proper gauge wire for power and ground – do not let your amp be a
victim of this common installation oversight!
127(7KLVGHYLFHLVDKLJKSRZHUDXGLRDPSOLILHULQWHQGHGIRU
LQVWDOODWLRQLQYHKLFOHVZLWKD9ROWQHJDWLYHJURXQGHOHFWULFDOV\VWHP
$WWHPSWLQJWRFRQQHFWRURSHUDWHWKHDPSOLILHUZLWKDQRWKHUW\SHRI
HOHFWULFDOV\VWHPPD\FDXVHGDPDJHWRWKHDPSOLILHURUWKHHOHFWULFDO
V\VWHP
,QVWDOODWLRQ$VVLVWDQFH
For installation assistance, call 1-800-323-4815 during normal business hours,
or visit www.jensen.com at any time.
6XSSOLHVDQG7RROV1HHGHG
To install the amplifier, you will need tools, supplies and adapters. It is best to
make sure you have everything you need before you start.
Supplies
• Black electrical tape
• Amplifier Installation Kit
Tools
• Cordless drill with assortment of bits
• Flat-head and Phillips screwdrivers
• Wire cutters/strippers
• Crimping tool
• 12-volt test light or digital multimeter
• Wire brush, sandpaper or scraping tool (ground connection to vehicle should
be a clean, unpainted metal surface)
'LVFRQQHFW%DWWHU\
Disconnect the negative (-) battery cable before starting the installation. Check
the battery ground (there should be two (2) ground wires coming from the
battery – one going to the starter mounting bolt or engine block and another
going to the vehicle chassis) and make sure the battery is grounded to the
chassis with at least a #8 gauge wire. Also check the alternator connections,
making sure they are tight and free from corrosion, rust or dirt.
/RFDWLRQDQG0RXQWLQJ
The amplifier’s compact design allows great flexibility in mounting. Common
mounting locations include under the front passenger seat or in the trunk area.
When selecting a location, remember that amplifiers generate heat. Select a
location on a flat surface away from heat and moisture where air can circulate
around the amplifier.
Place the amplifier in the mounting location and mark the positions of the holes
with a marker, pen or pencil. Carefully drill the mounting holes in the marked
positions, then use the supplied mounting screws to securely fasten the
amplifier to the mounting surface.
:$51,1*'RQRWFRYHUWKHDPSOLILHUZLWKFDUSHWVRUHQFORVHLWEHKLQG
LQWHULRUWULPSDQHOVDQGGRQRWPRXQWWKHDPSOLILHULQDQLQYHUWHGRU
XSVLGHGRZQFRQILJXUDWLRQ%HVXUHWKHPRXQWLQJORFDWLRQDQGWKH
GULOOLQJRISLORWKROHVZLOOQRWGDPDJHDQ\ZLUHVFRQWUROFDEOHVIXHO
OLQHVIXHOWDQNVK\GUDXOLFOLQHVRURWKHUYHKLFOHV\VWHPVRUFRPSRQHQWV
5RXWLQJ:LUHV
Proper wiring connections are illustrated on the following pages. If wiring
connections are made incorrectly, the unit will not operate properly and could
become permanently damaged. Follow the installation instructions carefully, or
have the amplifier installed by an experienced technician.
