10
LISTENING TO iPod/iPhone
CONNECTING
1.) Use the adapter included with your iPod and insert it into the docking area. No
adaptor is required if you use an iPhone. Your iPod / iPhone can now be
inserted into the docking port by placing the connector on the bottom of the
iPod onto the connector in the docking bay.
Note:
Please be careful when placing the iPod / iPhone into the docking bay to
avoid damaging the 30-pin connector on the iPod/iPhone or on the
docking system.
2.) Press the POWER ON/STANDBY
button
on the docking base or press and
hold it on the remote control to turn on the unit.
3.) The iPod/iPhone will start playing automatically and start charging immediately.
You can also start playing the iPod/iPhone by tapping the iPod/iPhone
PLAY/PAUSE
button when the unit is in a different mode.
4.) Tap the iPod/iPhone
PLAY/PAUSE
button to pause or resume iPod
playback.
5.) Adjust the sound level by pressing the /-
buttons. You should now
be able to take the speakers freely from room to room without interruption
(Operating distance is subject to your surroundings and interior walls. Up to
128 foot range in open/ unobstructed areas without any surrounding
interference).
Note:
The volume level cannot be adjusted using the volume control on your
iPod/iPhone after being docked.
6.) The iPod/iPhone will charge in all modes including during playback.
iPod/iPhone playback control:
Tap the iPod/iPhone
PLAY/PAUSE
button to pause or resume the