3
INSTALLATION(CONT.)
- Only use speakers with 4 ohms impedance.
- Do not attach the control panel to the chassis before wiring is complete.
- The maximum current of the auto antenna is 200mA.
Removal of the Main Unit
1. Remove the plastic trim out from the main unit.
2. Insert a bracket key into the left and right side of the main unit and draw the unit out of
the mounting sleeve.
Wiring Connections
WIRING
DIAGRAM
CAUTION
+12V DC
NEGATIVE
GROUND
Front Left CH RCA Output
(white)
Rear Left CH RCA Output
(white)
Front Right CH RCA Output
(red)
Rear Right CH RCA Output
(red)
ACC/ignition (Red)
GND/ground (Black)
ANT/aerial (BLUE)
Power/battery (Yellow)
Radio Antenna Socket
FUSE 10A
Green
Purple
Rear Right
Speaker
Front Right
Speaker
Rear Left
Speaker
Front Left
Speaker
Purple/Black
Green/Black
White
White/Black
Gray
Gray/Black
10A
