E-7
POWER ON/STANDBY
1. In standby mode, press the
BUTTON (#9) once to turn on the unit.
2. Press the
BUTTON (#9) again to return the unit to standby mode.
TIME AND CALENDAR SETTING
In standby mode, press and hold the SET/MEM BUTTON (#8) for over 3 seconds to enter the
time set mode, after enter the setting mode, press SET/MEM BUTTON (#8) to change the
mode cycle as follows.
Normal
→
Year
→
Month
→
Day
→
12/24 H
→
Real time Hour
→
Real time Min
→
Normal
Action (during data adjustment):
-
Press the
BUTTON (#4) to adjust data backward.
-
Press the
BUTTON (#5) to adjust data forward.
-
Keep depress
BUTTON (#4) or
BUTTON (#5) for 3 seconds to enable fast
backward or forward.
Note:
If the PM Indicator is not showing, the time displayed is AM.
DST (DAYLIGHT SAVING TIME) SETTING
Select DST (daylight saving time) mode
For areas that observe daylight saving time (DST), the JCR-225 offers you a DST option for
adjusting the time change.
1. In standby mode press and hold the SNOOZE/SLEEP/DIM BUTTON (#1) for 3 seconds.
The clock advances by one hour.
2. To exit DST mode, repeat the above operation.
ALARM OPERATION
SETTING ALARMS
1. In Standby Mode, press the
/ AL1 BUTTON (#6) to select alarm 1. The alarm time is
displayed.
2. Press and hold the
/ AL1 BUTTON (#6) over 2 seconds and the hours will blink. Press
BUTTON (#5) or
BUTTON (#4) to set the alarm hour.
3. Press the
/ AL1 BUTTON (#6) again and the minutes will blink. Press
BUTTON (#5)
or
BUTTON (#4) to set the alarm minutes.
4. Press the
/ AL1 BUTTON (#6) again and press
BUTTON (#5) or
BUTTON (#4)
to select day(s) of the week the alarm should sound.
Note : 1-5 : Monday to Friday
1-7 : Whole week
6-7 : Saturday & Sunday
1-1 : One day of week
5. Press the
/ AL1 BUTTON (#6) again and press the
BUTTON (#5) or
BUTTON
(#4) to select the alarm sound mode.
