E-6
LED Display
POWER SOURCE
AC POWER CONNECTION
This product operates on 120V ~60Hz AC power supply. Plug the AC power cord into a
household outlet AC source.
INSTALLING THE BACK-UP BATTERY
This unit is equipped with a battery back-up system, it requires a 3V CR2032 lithium battery
(not included) to maintain the time settings and radio presets during an AC power outage.
1. Remove the battery compartment door.
2. Install a 3V CR2032 lithium battery into the BATTERY COMPARTMENT (#16) following
the polarity diagram inside. Use only the specified size and type of batteries.
3. Replace the battery compartment door.
Note:
The unit will operate without a battery installed but your time & alarm setting will be lost
and will have to be reset in the event of power interruption or failure.
IMPORTANT:
Be sure that the battery is installed correctly. Wrong polarity may damage the unit and void
the warranty. For best performance and longer operating time, we recommend the use of
good quality alkaline battery.
BATTERY CARE:
• Use only the size and type of battery specified.
• If the unit is not to be used for an extended period of time, remove the battery. Old or
leaking batteries can cause damage to the unit and may void the warranty.
• Do not try to recharge batteries not intended to be recharged; they can overheat and
rupture (Follow battery manufacturer’s directions).
• Do not dispose of batteries in fire, batteries may leak or explode.
WARNING
DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD
This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it
can cause severe internal burns in just 2 hours and can lead to death.
Keep new and used batteries away from children. If the battery compartment does not close
securely, stop using the product and keep it away from children.
If you think batteries might have been swallowed or placed inside any part of the body, seek
immediate medical attention.
