background image

CHARGING YOUR SMART PHONE OR PORTABLE DEVICE

This unit features a USB port for charging your portable device (iPod, iPhone, Android
phone, etc.) when used with the USB charging cord that came with your device.

1. Plug one end of the USB cable (not included) into the

USB Charging Port

located on the back of the unit. Plug the other end of the cord into the device you
wish to charge.

2. Observe the battery charge indicator on your device to make sure the charging

process starts normally.

3. Unplug the cable when your device is fully charged.

CAUTION:

Before charging, please refer to the user manual of the device you wish to charge to
make sure the charging current requested does not exceed 1A (1000mA).
Overloading the charging circuit may damage the unit permanently and void the
warranty.
1. The USB charging port of this unit supplies a DC 5V output at 1000mA maximum

current to charge your smart phone or portable device battery and it cannot
support

any other voltage range.

2. Make sure the device you want to charge has a battery charge rating of DC 5V

only.

3. The USB port of this unit is designed for smart phone or portable device battery

charging only and it cannot support data transfer or connect to computer.

4. Do not connect the USB port of this unit to other external power charger USB

ports, it may damage both units and void the warranty.

Note:

1. Some smart phones and portable devices use proprietary USB connections

and circuitry, so they may not charge when plugged into the USB port. Please
refer to your device user manual before you attempt to charge them.

2. It is normal if the unit gets warm while the USB port is in use and charging your

smart phone or portable device.

3. Do not charge your smart phone over 12 hours continuously. Disconnect your

smart phone or other portable device from the USB cord once it is fully
charged.

DIMMER

Press the

Snooze / Dimmer Button

to adjust the LCD backlight intensity to obtain the

E-10

best clarity of LCD Panel readout.

Note:

Every time you turn on the unit, the LCD backlight will revert to highest intensity to
let you operate the unit easily.

After adjusting the LCD backlight intensity in standby mode, the intensity level will
be stored and there is no need to adjust every time.

Summary of Contents for JBD-100A

















Reviews: