background image

2. Turn on the unit and tap the

Source Button

to select Bluetooth mode, Bluetooth

icon

will be flashing slowly on display. The unit is searching the last paired

device. Once it is found, the icon

will light steadily.

3. After successfully pairing (linking), you can begin playing music from your

Bluetooth enabled device wirelessly to the speaker.

4. Press the

/ Volume - Button

on the speaker to adjust to the desired

volume level.

5. After selecting your favorite song, press

Play / Pause

Button

on the unit to

play or pause the playback song.

6. Press

or

button to skip to the previous or next song.

7. If the unit need to pair with another Bluetooth device. Press and hold the

Pair

Button

for 4~5 seconds. The

icon will be flashing rapidly on the LCD display

and 2 short beep will heard, the unit will goes into Pairing/Discoverable mode

again. Repeat last 2 steps on point 1 above.

Notes:

1. Refer to the manual of your cell phone, tablet PC, computer or other Bluetooth

enabled devices for Bluetooth operation since it may vary from model to model.

2. If your Bluetooth enabled device does not support A2DP profile, it will not play

the music through the speaker, even if paired (linked).

3. If you are pairing (linking) your computer to the unit using Bluetooth, you may

need to set the speaker as your computer’s default sound device.

Using the unit as a Hands-free Bluetooth Speakerphone

1. Link your cell phone to the unit via Bluetooth as described above.
2. When receiving an incoming call on your cell phone, tap the

Phone

Button

on

the unit to switch the incoming call from cell phone to the unit. A short beep tone will
be heard confirming the call is being answered. Complete your call using the built-in
microphone and speaker on the unit.

3. Press the

/ Volume - Button

on the unit to

obtain the desired sound level.

4. To end the call, just tap the

Phone

Button

on the unit again. A short beep

E-9

sound will be heard and the call will end. If you are playing music from your cell
phone to the unit before answering the call, the music will automatically resume
playing when you hang up.

5. To ignore an incoming call, simply press and hold the

Phone

Button

on the

speaker for about 3 seconds, a short beep tone will be heard and the call will be
rejected.

Hang up with the JBD-100A

A quick press on the

Phone

Button

will end the call in progress. A short beep tone

will be heard from the speaker confirming the call has ended.

Redialing the last number with the speaker

The speaker will automatically redial the last number you have dialed by pressing &
holding the

Phone Button

on the speaker for about 3 seconds a long beep will

heard.

Note:

This feature is phone dependent.

Summary of Contents for JBD-100A

















Reviews: