background image

13

DV352

SUBTITLE Language Setup

Select one of the following preferred SUBTITLE options using the the  /  buttons (29): ENGLISH, 
FRENCH, SPANISH, CHINESE, JAPANESE, GERMAN, ITALIAN, PORTUGUESE.

DISC MENU Language Setup

Select one of the following preferred DISC MENU language options using the the  /  buttons (29): 
ENGLISH, FRENCH, SPANISH, CHINESE, JAPANESE, GERMAN, ITALIAN, PORTUGUESE.

PARENTAL Settings

Select a suitable parental guidance setting using the the  /  buttons (29), then confirm by 
pressing the 

OK

 button (30) on the remote control. The parental rating options are as follows: 1 G, 

2, 3 PG, 4 PG 13, 5 6 PG-R, 7 NC-17, 8 ADULT, NO_PARENTAL.

PASSWORD Change

To change the password: 

1.

Select “CHANGE” then press the 

OK

 button (30) on the remote control.

2.

OLD PASSWORD: Type the old password (the default factory code is 3308).

3.

NEW PASSWORD: Key in a 4 character password.

4.

CONFIRM PWD: Retype the new password.

5.

Press the 

OK

 button to confirm and return to the previous menu.

DEFAULTS Reset

Select “RESET” to revert to default (initial) factory settings.

SMART NAV Menu

Select “WITH MENU” to display the smart navigation menu while playing an MP3 disc. With 
this option, you can select a track to play according to the menu hint.

Select “NO MENU” to play an MP3 directly when inserted.

Custom LOGO

You can use this feature to add a custom logo that will appear on the video screen when the unit is 
turned on. To add a custom logo:

1.

Select “CUST LOGO” from the LOGO menu.

1.

Insert a disc with the logo, in JPEG format, into the disc drive on the DVD player. (NOTE: The 
logo 

must

 be in the JPEG format.) 

2.

Select the desired picture, press the 

 

button (6), then press the 

TITLE

 button (32). The 

current picture is stored in the unit and “LOGO IS COPIED” appears on the screen.

Select “ORIG LOGO” to return the default image.

Disc Symbols and Properties

NOTE: The following types of discs will not play in this unit: DVD-ROM, DVD-RAM, CDV, 
CD-G. DVD-R discs WILL play in this unit.

Table 1: Disc Properties

Symbol

12cm Disc Properties

Max Play Time

Single side single layer (DVD-5)
Single side double layer (DVD-9)
Double side single layer (DVD-10)
Double side double layer (DVD-18)

(MPEG 2 Method)

133 minutes
242 minutes
266 minutes
484 minutes

Single side single layer (Video CD)

(MPEG 1 Method)

74 minutes

Single side single layer

74 minutes

Single side single layer

74 minutes

Table 2: DVD Disc Symbols

Symbol

Meaning

Number of voice languages recorded. The number inside the icon indicates the number lan-
guages on the disc (maximum of 8).

Number of subtitle languages available on the disc (maximum of 32).

Number of angles provided (maximum of 9).

Aspect ratios available. “LB” stands for Letter Box and “PS” stands for Pan/Scan. In the 
example on the left, the 16:9 video can be converted to Letter Box video.

Indicates the region code where the disc can be played.

Region 1: USA, Canada, East Pacific Ocean Islands

Region 2: Japan, Western Europe, Northern Europe, Egypt, South Africa, Middle East

Region 3: Taiwan, Hong Kong, South Korea, Thailand, Indonesia, South-East Asia

Region 4: Australia, New Zealand, Middle and South America, South Pacific Ocean 
Islands/Oceania

Region 5: Russia, Mongolia, India, Middle Asia, Eastern Europe, North Korea, North 
Africa, North-West Asia              

Region 6: Mainland China

ALL: All regions

Summary of Contents for DV352
















Reviews: