8
®
CD515K
✓
Testing
Before you finish the installation, you should do the following tests to make sure the wiring is correct
and everything is operating properly.
Test Power Wiring
1. Turn ignition switch on. The display should
light. If not, check the electrical connection
at the yellow and red wires.
2. Press
PWR
button to turn the receiver on.
You will see the radio display. If not, check
electrical connections to the red and
yellow wires.
3. If equipped, the power antenna should
also operate. If not, check electrical
connections to the dark blue wire.
Reconnect Battery
When wiring is complete,
reconnect the battery
negative terminal.
+
–
View/Set the Clock
To view the time, press
CLK
button to
temporarily display clock.
To set the clock:
1. Press
CLK
button to display clock.
2. Press and hold
CLK
button for more than
two seconds. The colon will start blinking.
>2 sec
CLK
1
CLK
2
TUNE
3
M
H
3. Within 3 seconds, press on the
TUNE
button to change the hours and to
change the minutes.
