background image

 

2

WARNING 

TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS 
APPLIANCE TO RAIN OR MOISTURE. 

 

IMPORTANT SAFETY INSTRUCTIONS 

1.  Read these instructions 
2.  Keep these instructions 
3. Heed 

all 

warnings. 

4. Follow 

all 

instructions. 

5.  Do not use this apparatus near water. 
6.  Clean only with dry cloth. 
7.  Do not block any ventilation openings. Install in accordance with these instructions. 
8.  Do not install near any heat sources such as radiators, heat registers, stoves, or 

other apparatus (including amplifiers) that produce heat. 

9.  Protect the power cord from being walked on or pinched particularly at plugs, 

convenience receptacles, and the point where they exit from the apparatus. 

10.  Unplug this apparatus during lightning storms or when unused for long periods of 

time. 

11.  Refer all servicing to qualified service personnel. Servicing is required when the 

apparatus has been damaged in any way, such as power-supply cord or plug is 
damaged, liquid has been spilled or objects have fallen into the apparatus, the 
apparatus has been exposed to rain or moisture, does not operate normally, or has 
been dropped. 

12.  This appliance shall not be exposed to dripping or splashing water and that no 

object filled with liquids such as vases shall be placed on the apparatus. 

13.  Main plug is used as disconnect device and it should remain readily operable during 

intended use. In order to disconnect the apparatus from the mains completely, the 
mains plug should be disconnected form the mains socket outlet completely. 

14.  Do not attempt to dismantle, open or repair this product yourself. If a fault occurs, 

seek advice from your local qualified service technician or contact the distributor via 
the telephone number at the back of this instruction manual. 

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN 

WARNING: TO REDUCE THE 
RISK OF ELECTRIC SHOCK, 
DO NOT REMOVE COVER 
(OR BACK). NO USER 
SERVICEABLE PARTS 
INSIDE. REFER SERVICING 
TO QUALIFIED SERVICE 
PERSONNEL. 

The lightning flash with arrowhead 
symbol, within an equilateral 
triangle is intended to alert the 
user to the presence of 
uninsulated dangerous voltage 
within the product's enclosure that 
may be of sufficient magnitude to 
constitute a risk of electric shock to
persons. 

The exclamation point within an 
equilateral triangle is intended to 
alert the user to the presence of 
important operating and 
maintenance (servicing) 
instructions in the literature 
accompanying the appliance. 

Summary of Contents for JMC-200





















Reviews: