15
ALARM OPERATION
The following steps can be accomplished by using either the remote or controls with the
same function on JMC-200. For example the Alarm Time is set at 7:00 AM.
SETTING ALARM TIME
1. Press the SLEEP/AL SET button when the player is in standby mode. The Alarm
Indicator, “
” appears. The Alarm time will flash to prompt for input.
2. Press the
and
button repeatedly to adjust the hour and minute until the
desired wake time is displayed.
NOTE:
Be sure to observe the PM indicator to make sure that the time is set correctly for AM or
PM. If the PM indicator is 'On', the time displayed is "PM". If the PM indicator does not
light, the time displayed is "AM ".
3. Press the SLEEP/AL SET button to complete. The Display will revert to current time
(12:30 PM).The Alarm will beep and last for one hour when the alarm time (7:00) is
reached.
Wake to Beeping Alarm
NOTE: The Player will exit Alarm Time Setting mode automatically if no button is pressed
within a period of about 10 seconds.
SETTING CD OR RADIO ALARM MODE
Other than the Beeping Alarm mode, you can choose wake to CD or wake to RADIO
mode by pressing the FUNCTION
Button to select CD or Radio wakeup mode. Icon “CD”
or “RADIO” will be displayed depending on what wakeup mode is chosen.
Wake to CD
Wake to RADIO
The CD or Radio will play continuously when the alarm time is reached.
