9
9
Service and maintenance
Maintenance work may only be carried out when the
axes are completely stopped.
The axes must not be in the
regulation and must first be disconnected from the
power supply.
The linear motor system must not be immersed or sprayed in
liquids for cleaning.
Basically, coarse contamination should be removed with a soft
brush or with oil-free compressed air.
10
Note
This instruction manual contains copyright protected
information. All rights are reserved. This document may not be
in its entirety or partially copied, duplicated or translated
without the prior consent of Jenny Science AG.
Jenny Science AG grants no guarantee on, or will be held
responsible for, any incidents resulting from false information.
Information in this instruction manual is subject to change.
Jenny Science AG
Sandblatte 7a
CH-6026 Rain, Schweiz
Tel +41 (0) 41 455 44 55
Fax +41 (0) 41 455 44 50
www.jennyscience.ch
© C o p y r i g h t J e n n y S c i e n c e A G 2 0 2 0