Step # 17
Drilling the Wire Harness Holes
Repeate the same process and drill a
hole in the upper right corner of the
section # 3 acrylic window. Again, it is
suggested to use the inside corner of
the graphic as a guide to where this
hole should be drilled.
BOSE SPEAKER INSTALLATION INSTRUCTIONS
Step # 15
Installing the Sign Mounting Bracket
Step # 16
Drilling the Wire Harness Holes
Using the same drill bit - drill a hole into the
upper left section # 3 acrylic window. This
hole is used to route the speaker wire out of
the cabinet and to the new speakers. It is
suggested to drill this hole in the corer of
the graphic as it will be hidden behind the
speaker once installed.
Install the sign mounting bracket. This
bracket is used to secure the sign to the
marquee header unit. Ensure that all four
screws are tight.
JET Games
Kahuna's Big Wave Service Manual
54
