Check Box When This Step is Complete
Step # 52
Securing the lighted marquee
Ensure that all SIX screws are properly secure and then locate the
marquee electrical wires. There are two connectors - one TWO PIN
Molex and one THREE PIN Molex connector.
Check Box When This Step is Complete
Step # 53
Routing the wire connections into section # 3
Pass both sets of wires through the access hole in the header section.
Check Box When This Step is Complete
Step # 54
Connecting the wire connections for the marquee
From inside the header and in the upper right hand corner - locate the
wires you passed through and connector both the male THREE PIN
Molex connector and the TWO PIN Molex connector into the female
end.
INSTALLATION INSTRUCTIONS
JET Games Corporation
Gum Drop Service Manual
