Check Box When This Step is Complete
Step # 44
Installing wire connection # 2
Connect the THREE PIN Molex with the RED and ORANGE wires.
Check Box When This Step is Complete
Step # 45
Installing wire connection # 3
Connect the TWO PIN Molex connector with the two BLACK wires.
Check Box When This Step is Complete
INSTALLATION INSTRUCTIONS
Step # 43
Installing wire connection # 1
Carefully connect the 24 PIN Molex connector into the "PC_START.PCB"
board. Take care when pushing the connector in as its possible pins
could be pushed out should you exert too much force.
JET Games Corporation
Gum Drop Service Manual
