6
BEFORE USING THE COFFEE SYSTEM
NOTE:
This product is intended for household use only.
Coffee has been used to factory test the machine. It is completely
normal for there to be traces of coffee in the mill.
Customize water hardness as soon as possible. See “Water
Hardness” in the “Settings” section.
IMPORTANT:
Complete the following steps before the coffee
system is used for the first time.
1.
INSERT WATER OUTLET: Check that the hot water/steam
spout is inserted on the connection nozzle.
2.
Turn on the coffee system.
3.
To select a language, press or until the flag
corresponding to the required language appears on the
display, then press the flag.
4.
FILL WATER TANK WITH FRESH WATER: Remove the water
tank, open the lid and fill to the MAX line with fresh water.
Replace water tank.
5.
Place a container with a minimum capacity of 1/2 cup (100 mL)
underneath.
WATER CIRCUIT EMPTY PRESS OK TO START FILLING
PROCESS will show on display. Press
OK
to confirm.
6.
The coffee system will deliver fresh water from the spout then
turns off automatically. The coffee system is now ready for
normal use.
NOTES:
■
When first using the coffee system, you need to make
4-5 cappuccinos before the coffee system gives good results.
■
Before turning the coffee system on, make sure the main
switch is turned on. Each time the coffee system is turned on,
it performs an automatic preheat and rinse cycle which cannot
be interrupted. The coffee system is ready for use only after
the cycle is complete.
A
B
A. Hot water and steam nozzle
B. Hot water spout
A
A. Water tank
04-Mar-2019 07:49:57 EST | RELEASED
In some European factories the letter "W" of the part code mentioned herein will be automatically
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")
