9
8.
Attach the hood assembly to the lower vertical supports with
32 screws Ø3.5x9.5 mm as shown in figure, step 1-2.
Ø3.5x9.5 mm
For the Non-Vented (Recirculating) Installations,
the kit must
be ordered from your retailer. The kit is composed of a carbon
filter, a bracket and 4 screws Ø3.5x9.5 mm, the bracket must be
fixed to the lower part of the hood with the 4 screws supplied as
shown in figure.
Ø3.5x9.5 mm
Non-Vented (Recirculating) Installations:
Take the air diverter
and fix it to the wall bracket previously fixed, with 2 screws
Ø3.5x9.5 mm. Fix the air diverter on the support bracket of the
structure with 4 screws Ø3.5x9.5 mm as shown in figure.
Ø3.5x9.5 mm
Ø3.5x9.5 mm
Exhaust Installations:
Connect the flexible pipe to the external
outlet hole as shown in figure.
Summary of Contents for W10692945
Page 15: ...15 WIRING DIAGRAM...
