9
Charcoal Filter Bracket Installation
1.
Align charcoal filter bracket
■
Remove the charcoal filter bracket from the box and place
it at the desired height above the hood canopy bottom (use
provided template for reference).
■
Ensure the center of the bracket is aligned with the center
line marked to confirm the center of the hood aligns with the
center of the filter bracket.
2.
Drill pilot holes
■
Mark holes as per center line and drill 2-8 mm holes.
Tip:
Use a level tool to ensure the bracket is level before
drilling the holes.
3.
Install anchors
■
Install 2 anchors and screw the bracket into place.
■
Do not fully tighten the screws as the bracket will need to be
removed in the next step.
4.
Mark center hole
■
Mark the center hole with a pencil.
