Jenn-Air JVR0436HS, Installation Instructions And Use & Care Manual

Page: 9 / 36

9
Charcoal Filter Bracket Installation
1.
Align charcoal filter bracket
■
Remove the charcoal filter bracket from the box and place
it at the desired height above the hood canopy bottom (use
provided template for reference).
■
Ensure the center of the bracket is aligned with the center
line marked to confirm the center of the hood aligns with the
center of the filter bracket.
⁵
/
₁₆
" (8 mm)
2.
Drill pilot holes
■
Mark holes as per center line and drill 2-5/16" (8 mm) holes.
Tip: Use a level tool to ensure the bracket is level before
drilling the holes.
3.
Install anchors
■
Install 2 anchors and screw the bracket into place.
■
Do not fully tighten the screws as the bracket will need to be
removed in the next step.
4.
Mark center hole
■
Mark the center hole with a pencil.