5
INSTALLATION REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools
listed here.
Tools needed:
■
Level
■
Drill with 1
1
/
4
" (3.0 cm), 3/16" (5.0 mm) and 6/19" (8.0 mm)
drill bits
■
Pencil
■
Tape measure or ruler
■
Adhesive tape
■
Flat-blade screwdriver
■
Metal snips
■
Phillips screwdriver
■
POZI driver
■
T20
®
Torx
®
bit or driver
Parts needed:
Part Name
Qty.
Flexible duct as per
ceiling height;
external diameter
6" (15.2 cm)
1
6
"
(15.2 cm)
Steel duct clamps for
6" (15.2 cm) ducts
2
Parts supplied:
Remove parts from packages. Check that all parts are included.
Part Name
Qty.
Hood canopy
assembly with
ventilator and lights
installed
1
Chimney covers
2
Charcoal filter
mounting bracket
1
Charcoal filter
1
Part Name
Qty.
Charcoal filter
clamps
3
Plastic transition
1
Paper template
1
3 prong plug with
connector
1
Wire clamp
1
Ø5 x 45 mm screws
8
Ø8 x 40 mm anchors
8
3.5 x 9.5 mm screws
6
2.9 x 6.5 mm pins
2
Flat washers
3
Summary of Contents for JVR0436HS
Page 17: ...17 WIRING DIAGRAM...
Page 35: ...35 Remarques...
