2
BUILT-IN MICROWAVE/OVEN COMBINATION SAFETY
INSTALLATION REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools
listed here.
Tools Needed
■
Phillips screwdriver
■
Measuring tape
■
Drill (for wall cabinet installations)
■
1" (2.5 cm) drill bit (for wall cabinet installations)
■
Level
■
Flat-blade screwdriver
Parts Needed
■
UL listed or CSA approved conduit connector
■
UL listed wire connectors
■
Warming Drawer Deflector Kit (for ovens installed above
a warming drawer)
Order Part Number W10489566B for white 27" (68.6 cm) kit
Order Part Number W10489564B for black 27" (68.6 cm) kit
Order Part Number W10489568A for stainless steel
27" (68.6 cm) kit
Order Part Number W10489567B for white 30" (76.2 cm) kit
Order Part Number W10489565B for black 30" (76.2 cm) kit
Order Part Number W10489569A for stainless steel
30" (76.2 cm) kit
Order Part Number W10727416A for stainless steel/black
30" (76.2 cm) kit.
To order, see the “Assistance or Service” section of the
Use and Care Guide.
■
Flush Installation Kit (for Combo installed at
flush installation)
Model JMW2427DB:
Order Part Number W10801483 for black
27" (68.6 cm) kit
Model JMW2427DS:
Order Part Number W10801481 for stainless steel
27" (68.6 cm) kit
Model JMW2430DB:
Order Part Number W10801484 for black
30" (76.2 cm) kit
Models JMW2430DS and JMW2430DP:
Order Part Number W10801482 for stainless steel
30" (76.2 cm) kit
Model JMW3430DB:
Order Part Number W10837589 for black
30" (76.2 cm) kit
Models JMW3430DS and JMW3430DP:
Order Part Number W10837591 for stainless steel
30" (76.2 cm) kit
To order, see the “Assistance or Service” section of the
Use and Care Guide:
Parts Supplied
■
#8-14 x 1" screws (4)
■
Bottom vent
■
#8-18 x ³⁄
8
" screws – bottom vent (2)
Check local codes. Check existing electrical supply.
See “Electrical Requirements.”
It is recommended that all electrical connections be made
by a licensed, qualified electrical installer.
Built-In Microwave/Oven Combination
Location Requirements
IMPORTANT:
Observe all governing codes and ordinances.
■
Cabinet opening dimensions that are shown must be used.
Given dimensions provide minimum clearance with oven.
